SWG 100 BIOGAS Compact Analyzer




Stationary Biogas-measuring system for discontinuous measurements. Cost effective stationary biogas analyzer designed for:
Discontinuous measurement, user settable up to 24 measurements per 24 hours – Use in the harsh industrial environment of combined heat and power (CHP) engine gas monitoring – Accurate measurements, incl. plug & play pre-calibrated sensors – Up to 2 sites monitoring (times sharing technique)
- Plug & play, pre-calibrated sensors
- Safety in use with gas flow restrictor orifice at gas inlet and ventilation
- Effcient sample gas preparation for fast and reliable measurements
- Sampling from low suction up to high pressure gas
- No dilution of the sample gas, neither use of compressed air is required
- Discontinuous measurement, user settable up to 24 measurements per 24 hours
- Up to 2 sites monitoring (time sharing technique) with only one analyzer
- Data storage and event logging on SD card
- IP 54 cabinet for use in harsh environment
- Ready to run delivery, minimum installation work, low service downtime
- May be installed outside or inside
Measuring ranges | |
O2 – Oxygen | 0 … 25 % (electro-chemical sensor) |
CO2 – Carbon dioxide | 0 … 100% NDIR |
CH4 – Methane | 0 … 100% NDIR |
H2S – Hydrogen sulfide | 0 ….. 2,000 ppm / 5,000ppm overload (electro-chemical sensor) |
Dimensions and other data | |
Operating temperature | 41°F …113°F (+5°C…+45°C) or -4°F …113°F (-20°C…+45°C) with cabinet heater |
Power supply | Universal 90 – 240 Vac / 47 – 63 Hz / 90 W (150 W with cabinet heater) |
Display | 3.5″ TFT color display with backlight |
Dimensions | 15.74” x 19.68” x 11.81” (400x500x300 mm) (WxHxD) wall or rack mounting |
Weight | approx. 31 lbs. (14 kg) |
Protection class | IP 54 |